Shop
150 mL Burette PlumSet™, Clave™ Y-Sites, 114″ $2,834.88 / CaseAdd to cart150 mL Burette PlumSet with Clave™ Y-Sites and 114″ length is a medical device designed for precise infusion measurements. It comes with a convertible piercing pin, 3 slide clamps, and a 150 mL cylinder with Clave™ additive port for easy drug administration. The cassette with capped secondary port, 2 Clave™ Y-sites and secure lock male adapter guarantees accurate fluid delivery. This product provides reliable accuracy and convenience, making it an essential tool for medical professionals.
Burette PlumSet — with convertible piercing pin, 3 slide clamps, 150 mL cylinder with Clave™ additive port, cassette with capped secondary port, 2 Clave™ Y-sites and secure lock male adapter.
- 48 each per box
In stock
150mL Burette PlumSet™ , Microbore, Clave™ Y-Site, 0.2 Micron Filter $2,100.38Add to cart- 4 slide clamps
- 150 mL Microdrip™ burette with Clave™ port and sight chamber
- Cassette with Clave™ secondary port
- 3 Clave™ Y-sites
- 0.2 micron filter
- Secure lock
- Priming capacity: 13mL
- 48 each/case
In stock
2500KG-BT Digital Wheelchair Ramp Scale with Built-in Pelstar Wireless Technology – KG Only $4,115.76Add to cartInternal Wireless Components
In stock
2600KG-BT Digital Wheelchair Ramp Scale with Built-in Pelstar Wireless Technology – KG Only $4,254.10Add to cart- Internal Wireless Components
- EMR Connectivity
- Wheels/Casters and Folding Ramps for Easy Portability and Storage
- Wide Platform for Wheelchair or Bariatric Use
- Calculates Body Mass Index
- Capacity: 454 kg
- Resolution: 0.1 kg
- Platform Size: 36″ (w) x 32-1/4″ (d) x 2-1/2″ (h) / 914 mm (w) x 819 mm (d) x 64 mm (h)
- Product Footprint: 48-1/8″ (w) x 43-7/8″ (d) x 49 -3/8″ (h) / 1222 mm (w) x 1114 mm (d) x 1254 mm (h)
- Ramp Size: 32-1/4″ (w) x 9-7/8″ (d) / 819 mm (w) x 248 mm (d)
Special_order
2nd skin® Blister Pad, Welded Seam $15.94 / BoxAdd to cartA hydrocolloid pad bordered by a thin film helps keep blisters from drying out, absorbs perspiration and helps promote a scab-free, naturally healed blister.
In stock
3M Red Dot™ Diaphoretic Soft Cloth Monitoring Electrode, Adult $17.38Add to cartWith Solid Gel and Lift Tab.
In stock
- ↓ 2%Limited
3M Bair Hugger Temperature Monitoring System Original price was: $1,222.30.$1,192.04Current price is: $1,192.04.Add to cart3M Bair Hugger Temperature Monitoring System is a non-invasive and continuous temperature monitoring device for perioperative patients. It uses a single-use sensor placed on the patient’s forehead that stays connected throughout the patient’s journey. The sensor provides a consistent and accurate measurement readout in Celsius or Fahrenheit and is compatible with all patient monitors that accept YSI-400 type inputs. 3M Bair Hugger Temperature Monitoring System also includes a patient temperature trend graph that displays two hours of temperature data.
- Non-invasive technique: A single-use sensor is placed on the patient’s forehead before surgery and is worn throughout the perioperative journey
- Continuous: The termperature is always displayed. A patient temperature trend graph provides two hours of temperature data
- Consistent: The sensor stays on the patient, as it is disconnected from the sensor cable and reconnected at each point of care, eliminating the variability associated with clinician technique and use of multiple monitoring devices
- Measurement readout in celsius or fahrenheit
- Compatible with all patient monitors that accept YSI-400 type inputs
- Extendable height up to 4.5 inches (11.43 cm)
- Accurate continuously measures patient temperature with an affordable single-use sensor, providing standardization with one consistent temperature monitoring method throughout the perioperative process.
- Temperature Monitoring System.
- Non-invasive technique: A single-use sensor is placed on the patient’s forehead before surgery and is worn throughout the perioperative journey
- Continuous: The termperature is always displayed. A patient temperature trend graph provides two hours of temperature data
- Consistent: The sensor stays on the patient, as it is disconnected from the sensor cable and reconnected at each point of care, eliminating the variability associated with clinician technique and use of multiple monitoring devices.
- Measurement readout in celsius or fahrenheit
- Compatible with all patient monitors that accept YSI-400 type inputs
- Extendable height up to 4.5 inches (11.43 cm)
On_demand
3M Bair Hugger Temperature Monitoring Patient Sensor $517.34 / CaseAdd to cart3M Bair Hugger Temperature Monitoring Patient Sensor is a single-use sensor that is placed on the patient’s forehead before surgery, and is worn throughout the perioperative journey. Unlike passive skin surface temperature sensors, the system’s single-use sensor consists of a thermal insulator adjacent to the skin which is covered by a flex circuit. Once connected to the control unit, the flex circuit actively regulates its temperature to create a zone of perfect insulation – a condition where heat loss to the environment is eliminated. This allows the sensor to accurately measure and capture the core temperature of the patient.
3M Bair Hugger Temperature Monitoring Patient Sensor is placed on the patient’s forehead before surgery and is worn throughout the perioperative journey.
- Consistent temperature monitoring
- Accurate core temperature measurement
- Single-use
- Offers consistent performance as the sensor stays on the patient as it is disconnected from the sensor cable and reconnected at each point of care, eliminating the variability associated with clinician technique and use of multiple monitoring devices
- Compatible with all patient monitors that accept YSI-400 type input
- Latex-free
- Non-invasive technique.
- Accurate.
- Continuous.
- Consistent.
- For Pre-op, OR, PACU.
- Disposable.
Additional Information:
- Disposable / Reusable: Disposable
- Outer Diameter: 4.1cm
- Brand: Bair Hugger™
In stock
3M™ Clean-Trace™ Luminometer LX25 $6,669.66Add to cart- The 3M™ Clean-Trace™ Luminometer LX25 is a simple, quick and accurate hand-held diagnostic tool used to verify cleaning effectiveness and capture, store and transmit data for later analysis.
- The 3M™ Clean-Trace™ Luminometer LX25 was designed to be intuitive, featuring a colour touchscreen and a modern ergonomic design to help support more effective cleaning processes.
- After sampling, insert the 3M™ Clean-Trace™ ATP Surface Test UXC or 3M™ Clean-Trace™ ATP WaterTest H2O and within 10 seconds, the 3M™ Clean-Trace™ Luminometer measures, displays and records the results.
- Data is transmitted wirelessly to the 3M™ Quality Control Data Manager for analysis and reporting.
- Results are accurate, consistent and repeatable.
In stock
- Sold Out
3M Kerracel Gelling Fibre Dressing From: $73.58Currently Unavailable3M Kerracel Gelling Fibre Dressing is a highly absorbent primary wound dressing designed for the management of moderate to heavily exuding acute and chronic wounds. It is made of 100% carboxymethylcellulose (CMC) and forms a gel when in contact with exudate, providing a moist wound healing environment. The unstitched design conforms to the wound bed, reducing dead space and preventing bacterial proliferation. The dressing is also easy to apply and conforms to the wound bed for increased comfort.
- 3M Kerracel Gelling Fibre Dressing is a versatile carboxymethyl cellulose (CMC) primary dressing with a high absorption capacity for the management of moderate to heavily exuding, acute, and chronic, deep, or shallow wounds.
- Features include:
- 100 percent carboxymethylcellulose (CMC) absorbs and retains high levels of exudate forming a gel which conforms to the wound bed and supports a moist wound healing environment.
- Unstitched design aids micro-contouring to the wound bed minimizing dead space where bacteria can proliferate.
- Conformable for ease of application.
Additional Information:
- Sterility: Sterile
- Latex content: Latex-Free
- Brand: Kerracel™
Outofstock
3M™ Littmann® Stethoscope Identification Tags, Black, $7.68 / EachAdd to cartPersonalize and identify your Littmann stethoscope with the 3M™ Littmann® Stethoscope Identification Tags. Durable and adjustable, these black tags come with both write-on and engravable name plates.
In stock
3M™ Littmann® Stethoscope Identification Tags, Grey, $7.88 / EachAdd to cartPersonalize and identify your Littmann stethoscope with the 3M™ Littmann® Stethoscope Identification Tags. Durable and adjustable, these black tags come with both write-on and engravable name plates.
In stock
- ↓ 32%Limited
3M™ Littmann® Stethoscope Spare Parts Kit, Classic II Infant Assembly Original price was: $25.23.$17.23Current price is: $17.23.Add to cartBlack Snap-on Rim, Floating Diaphragm, Grey Snap-on Rim
Additional Information:
- Brand: Littmann® Classic II™
Onbackorder
- ↓ 22%Limited
3M™ Littmann® Stethoscope Spare Parts Kit, Classic II Pediatric Diaphragm Assembly Original price was: $31.12.$24.26Current price is: $24.26.Add to cartBlack Snap-on Rim, Floating Diaphragm, Grey Snap-on Rim
In stock
